Turnkey kitchen remodeling from Venice to Tampa

What turnkey kitchen remodeling includes

Turnkey means one contractor leads the whole kitchen as a single project: custom cabinetry, stone surfaces and, when the layout calls for it, structural remodeling. Darvin Kitchen is a Licensed Building Contractor (CBC 1269832) based in Bradenton, Florida, and runs each project from design to installation.

• Custom cabinetry. Custom and semi-custom cabinetry designed around your space and storage needs. Cabinet boxes are plywood, with soft-close European hinges and full-extension drawer systems, depending on the line.
• Stone. Quartz, mineral and porcelain surfaces, fabricated to fit around cabinets, appliances, sinks and architectural details.
• Structural remodeling. Demolition and structural changes, such as opening a layout. Load-bearing work needs engineering approval.
• Sinks, fixtures and storage. Sinks, faucets and pull-out storage chosen as part of the same design.
• Permits and inspections. Permits, engineering approvals and final inspections are part of most remodels that involve structural, electrical, plumbing or mechanical work. Who applies for them is described in your written agreement, so ask at your consultation.

How a turnkey kitchen remodel works

The process runs in a set order from design to final inspection, and cabinetry and stone are fabricated at the same time once your 3D layout is approved and permits are cleared.

1. 01

   Design consultation

   We review your space, how you live and cook, your design preferences and your investment goals, then assemble a complete material package.

2. 02

   Select appliances and materials

   Pick your appliances first, then the cabinet style, stone, sink, fixtures and storage. Exact appliance specifications let us engineer cabinets, integrated panels and electrical loads precisely.

3. 03

   Approve the 3D layout

   You see the kitchen in a 3D layout before anything is built. The approved layout drives permits and fabrication.

4. 04

   Permits and engineering approvals

   Permits and engineering approvals are part of most remodels with structural, electrical, plumbing or mechanical work. Who applies for them is described in your written agreement, so ask at your consultation. Rules differ by city and county; our guide covers permit rules in Tampa and Hillsborough County.

5. 05

   Simultaneous fabrication

   Once the layout is approved and permits are cleared, cabinetry and stone fabrication begin together.

6. 06

   Installation

   Structural work, where the project includes it, and the installation of cabinets, stone and fittings run as one coordinated process.

7. 07

   Final inspections

   Permitted work is closed out by the final inspections your local building department requires. How they are handled is described in your written agreement.

Timelines vary with the extent of structural work, such as removing load-bearing walls, so this page does not give a fixed schedule. For a deeper look at stages and what affects them, read our guide to the kitchen remodel timeline.

Turnkey versus hiring several contractors

With turnkey, one contractor coordinates the whole kitchen. With separate contractors, you coordinate the cabinet supplier, stone fabricator and trades yourself. Several contractors can make sense for a single-trade job, but for a full kitchen the differences add up.

For the pros and cons in more detail, read what a turnkey remodel includes and what to ask before you sign. To compare contractors on the same terms, see how to choose a kitchen remodeler in Tampa Bay.

Who turnkey is for

Turnkey suits homeowners who want to change the layout, replace the whole kitchen or avoid managing several trades. It is a good fit when:

• you want to move or remove walls, resize the kitchen or relocate appliances;
• you are choosing built-in or high-end appliances that need exact cabinet and electrical planning;
• you want cabinets, stone, sink and fixtures chosen as one system;
• you live between Venice and Tampa. See the areas we serve.

What is the Cabinetry & Stone Only package?

If your current layout suits you and no walls need to move, a “Cabinetry & Stone Only” package upgrades the room with custom cabinetry and stone, without demolition or structural changes.

It suits a kitchen whose layout already works. The cabinets and countertops, and the sinks, fixtures and storage if you choose them, come from the same catalog as a full turnkey project. Permit requirements still depend on the work, for example if plumbing or electrical changes, so confirm them locally (see below).

What does a turnkey kitchen remodel cost?

This page does not list prices, because the cost depends on the layout, the materials and how much structural work is involved. For published market estimates, see our guides to kitchen remodel cost in Tampa Bay, to whether $30,000 is enough for a kitchen remodel and to kitchen remodel budget rules of thumb.

Where does Darvin Kitchen work?

Darvin Kitchen is based in Bradenton and works from Venice to Tampa. Permit offices, flood rules and housing differ along this stretch, so each area has its own page. See all service areas.

Tampa, St. Petersburg and ClearwaterThree city permit offices and two counties; part of New Tampa is unincorporated.Read moreBradenton and Manatee CountySeveral governments inside one county, from Palmetto to Anna Maria Island and Longboat Key.Read moreSarasota and Siesta KeyCity or County permits, depending on your address.Read moreVenice, North Port and EnglewoodUp to four permit offices across two counties.Read moreLakewood RanchOne community across Manatee and Sarasota counties.Read more

Permits and flood-zone checks

Whether a kitchen needs a permit depends on the scope and on your city or county; confirm with your local building department. The City of St. Petersburg’s posted list of exempt permits (last revised in 2014), for example, includes cabinetry, counter tops and similar finish work, but not when the work affects a load-bearing wall, and separate electrical, plumbing or gas permits may still be required. In designated flood zones, the city asks for a cost breakdown even for work that would otherwise be exempt. In flood hazard areas, Manatee County’s 50% rule counts kitchen cabinets, countertops and built-in appliances toward its threshold.

Many kitchen remodels need permits, and who applies for them is part of the written agreement; ask at your consultation. Whoever you hire, check the contractor’s license first.

What to prepare for your consultation

Bring your appliance choices and a clear picture of how you use the kitchen. Those two things shape the cabinets, the electrical plan and the layout.

• Appliances. Models, or at least the type and brand of the refrigerator, range and wine cooler. Exact specifications let the cabinets and panels be engineered precisely.
• How you cook and live. Storage needs, such as pull-out pantries or hidden waste and recycling, and whether you want integrated lighting.
• Style. Door style (Shaker, Slim Shaker, high gloss slab or matte slab) and stone family (quartz, mineral or porcelain).
• Goals. What you want the project to achieve and the investment you have in mind.

Explore the materials and fittings

Every part of the kitchen comes from the catalog below, so you can browse before you book.

For humid and coastal homes, read about materials for humid and coastal Florida kitchens.

CabinetryShaker, Slim Shaker, high gloss slab and matte slab doors, with soft-close hardware.Read moreStoneQuartz, mineral and porcelain surfaces, fabricated to fit around your cabinets, appliances and sinks.Read moreSinksQuartz sinks in several sizes, depths and bowl configurations.Read moreKitchen fixturesPull-down kitchen faucets and fixtures. Examples shown on the page include Brizo and Moen models.Read moreStorage systemsHidden waste and recycling, blind-corner pull-outs and base-cabinet organizers.Read more

Keep reading

Kitchen remodel cost in Tampa Bay: what published estimates sayThe 2025 Cost vs. Value report prices three standardized Sarasota kitchen jobs from about $28,600 to about $161,200; other published sources report…Read moreHow long does a kitchen remodel take? Phases and what controls the scheduleA kitchen remodel runs on several clocks at once: decisions, permits, manufacturing and site work. Here is the order of the phases and what really…Read moreWhat is a turnkey kitchen remodel?A turnkey kitchen remodel is a project in which one company is responsible for delivering the finished kitchen, usually under a single contract. Here…Read moreDo you need a permit to remodel a kitchen in Tampa and Hillsborough County?Usually yes, if the work touches plumbing, wiring, gas, ventilation or walls. Finish-only work usually does not. Here is what the City of Tampa and…Read moreHow to check a Florida contractor licenseFlorida's licensing portal is public. Here are the steps, the fields to read, and the checks the license search does not do for you.Read moreService Areas: Venice to TampaDarvin Kitchen, based in Bradenton, remodels kitchens along Florida's Gulf Coast, from Venice to Tampa.Read more